The test site is located on US 52 between the junction with US 231 and Cumberland Ave, Lafayette, IN. The length of the project is about 5 miles long with two lanes on each direction. The existing pavement structure is 6" of HMA on top of 7" of concrete pavements. The existing pavement will be milled for about 2". A 19-mm intermediate HMA layer and a 9.5-mm HMA surface layer will be constructed on top of the milled surface.
Javascript is required to view this map.
|
| Roller shipping address (arrived by Friday, Sept. 21):
2868 US Hwy 52 W., West Layayette, IN 47906 Contacts: Ken Walschlager of Milestone, cell-(765)-969-8177 |
|
Open House (9:00AM to noon, Thursday, Sept. 24): Session 1 - 9:00AM to 11:00PM - Indoor Presentation (INDOT/Superpave Center, 1205 Montgomery Street, West Lafayette, IN 47906) Session 2 - 11:00PM to noon - Field Demonstration (INDOT/Superpave Center, parking lot) RSVP by Sept. 22, Contact Ruth Calish, ruth@thetranstecgroup.com, (512) 451-6233 INDOT Host contact: Tommy Nantung, tnantung@indot.in.gov, (765) 463-1521 ext. 248 Presentation
|
| Attention Participating Roller Vendors - participating IC rollers should be equiped with RTK GPS receivers. The GPS requirements for IC rollers are described here. |
Weather condition on the test site. |
The material type is FHWA/TPF Type IV HMA material.
NA
Meetings
Documents
![]() |
Video Clip 1
Video Clip 2
Video Clip 3
Michael Prather, INDOT - Asphalt Engr, 317-610-7251, mprather@indot.IN.gov
Dave Andrewski, INDOT - Office of Pavement Eng. 317-232-5452, dandrewski@indot.in.gov
Tommy Nantung, INDOT, 765-463-1521, Tnantung@indot.in.gov